Amazon Affiliate Links on a Site That Also Runs Display Ads: Where Ads Cost More Than They Earn, Ad-Free Zones on a Buyer Guide, and the Revenue-Per-Visitor Test
The second revenue stream most affiliate sites add is display ads, because the application is easy and the cheque arrives monthly whether or not anyone buys. Then the Amazon numbers drift down and nobody connects the two.
On a buyer guide, the money comes from a few clicks on a few elements, and an ad unit beside any of them competes for the same attention; the ad network pays for the impression, the affiliate link needed the click, and the page's total can go down while the new revenue line goes up. The fix isn't to choose between them.
It's to put ads where the page has no button to protect, and to measure the result per page type.
This post covers what an ad network pays a product site per thousand visitors against what the same visitors earn through Amazon, why ads above or beside the verdict and the buttons cut affiliate conversion by more than they add, and the three zones to keep ad-free on a guide.
It also covers where ads do fit on an affiliate site, the speed cost and how to contain it, and the revenue-per-visitor test that decides the question with your own numbers.
The monetisation beyond Amazon post covers when to add ads at all; this is where to put them once you have.
The short answer
Ads on informational posts, not on the parts of a buyer guide that earn. Keep the first screen, every pick section and the comparison table ad-free; place ads below the FAQ, in the footer and in a desktop sidebar. Lazy-load the ad scripts so they don't delay the hero.
Then compare revenue per visitor (Amazon plus ads) on guides with and without ads for a month; keep whichever layout wins, per page type.
What each pays
| Source | Typical earnings per 1,000 visitors on a product site | What it depends on | When it's paid |
|---|---|---|---|
| AdSense or a similar entry network | $5 to $15 | Niche, country, Q4; visitors on desktop; number of units | Monthly, by impression and ad click |
| Managed network (Mediavine, Raptive, Ezoic tier) | $15 to $40 after qualifying (traffic thresholds apply) | Same, plus the network's advertiser mix; home and finance high, hobby low | Monthly, net 60 or so |
| Amazon affiliate, informational post | $2 to $10 | Few buttons, low intent | Monthly, two months after the order |
| Amazon affiliate, buyer guide | $20 to $60, more in high-ticket categories | Click rate to Amazon (3 to 8%), order rate, average commission | Same |
Read the rows together: on an informational post, ads out-earn the affiliate links several times over and cost them little, because there's little to cost. On a buyer guide the affiliate line is the larger one, and the ad line can only add to it if it doesn't shrink it.
The conversion rate post covers the levers behind the guide's number; ads placed badly pull three of them at once.
Why ads near the buttons cost more than they earn
- They push the verdict down. An ad unit above the verdict box moves the first button below the fold on a phone, and the first-screen button is the largest single source of orders on the page.
- They compete for the glance. A moving or bright unit beside the comparison table pulls the eye at the moment the reader is comparing, which is the moment before a click.
- The sticky footer covers the button. Anchor ads at the bottom of a phone screen sit exactly where the reader's thumb was heading.
- Ad scripts slow the page. A full ad layout adds hundreds of kilobytes and several seconds of main-thread work on a phone, and readers who leave during the load never see a button. After video embeds, ads are the heaviest thing a page can carry.
- The arithmetic. A guide at $40 per thousand from Amazon that loses a fifth of its clicks to ad clutter drops to $32; the ad layout that caused it adds $15 to $25 on a good network. The total went up a little or down a little, and the guide got worse either way. Keep the ads off the three zones and the loss mostly vanishes, so the addition is real.
The three ad-free zones
- The first screen. Title, byline, verdict box, first button. Nothing else, on any device.
- The pick sections. Each product's section ends in a button; no unit inside the section or between it and the next. The link placement post has the click shares; the section buttons are the second-largest source after the verdict.
- The comparison table, and the screen around it. No unit above it, beside it, or immediately after it.
That leaves the criteria section (a unit after it is tolerable), below the FAQ, the footer area and a desktop sidebar. Most managed networks let you exclude placements by CSS selector or by post type; set the guides to a lighter layout and the informational posts to the full one.
Where ads do fit
- Informational posts and how-tos: the standard in-content layout. No button to protect, higher traffic, and the reader is reading, which is what ads are priced on.
- Hub pages, below the curated list, where the reader who has scrolled past every guide link is browsing.
- Below the FAQ on a guide, for the reader who read everything and didn't click.
- Desktop sidebar, which doesn't exist on the phone where most readers are, so it costs little.
- Not: interstitials, anchor ads on guides, video ad players, or any unit that autoplays sound. Each one is a conversion cost with a long tail of lost trust.
The speed cost, contained
- Lazy-load the ad script or defer it until after the hero and the first screen have painted; most networks support it and the vitals difference is large.
- Reserve the slot size with CSS so the layout doesn't jump when the unit loads; unreserved ad slots are the commonest cause of layout shift on content sites.
- Fewer units. Three well-placed units earn most of what eight do and cost half the weight.
- Test on a 390-pixel viewport with the ads on; the desktop view hides most of the damage.
The revenue-per-visitor test
- Pick ten buyer guides with steady traffic. Give five the lighter ad layout (three zones clear) and five no ads at all, for one month.
- For each, add the month's Amazon earnings (by tracking ID per page) to the month's ad earnings (by URL in the network's dashboard) and divide by visitors. That's revenue per visitor.
- Compare the two groups. If the ad group's RPV is higher, keep the lighter layout on guides; if it's level or lower, guides go ad-free and informational posts carry the ads.
- Run the same test on five informational posts with full ads against five with none; the answer there is almost always ads.
- Repeat in Q4, when both ad and affiliate rates move, and keep the layout that wins each season.
Doing it with AffSERP
Guides written by AffSERP's X Best Review tool put the verdict and its button in the first screen, a button at the end of each pick's section and the comparison table in its own block, which are the three zones above; keeping ads out of them is a matter of placement rules in your ad network or theme, not of editing each guide.
The informational posts the Informational Article tool writes are the pages that carry the full ad layout well, and per-page tracking IDs on the guides give the Amazon side of the revenue-per-visitor sum. The decision is yours and the numbers are yours; the page structure makes the ad-free zones easy to draw.
FAQ
Should I run display ads on my Amazon affiliate site?
On the informational posts, usually yes once traffic qualifies for a decent network; on the buyer guides, usually not in the places that earn. A buyer guide's revenue comes from a handful of clicks on the verdict button and the table, and an ad unit beside either one takes attention and screen space from the thing that pays. Run ads where the page's job is to inform (how-tos, explainers, the hub's long intros) and keep the first screen, the pick sections and the table of a guide ad-free. Then measure revenue per visitor on each page type, not site-wide.
How much do display ads pay compared to Amazon affiliate links?
Ad networks pay by the thousand pageviews: roughly $5 to $15 RPM for a small site on AdSense, $15 to $40 on a managed network like Mediavine or Raptive once you qualify, with the high end in finance and home categories and in Q4. A buyer guide converting 5% of visitors to Amazon clicks at a 10% order rate and a $6 average commission earns about $30 per thousand visitors from Amazon alone. The two are comparable in size, which is why the question is whether adding ads lifts the total or just moves money from the affiliate column to the ad column while shrinking both.
Where should ads go on a buyer guide?
Below the FAQ, in the footer area, and in the sidebar on desktop if the theme has one; nowhere in the first screen, nowhere inside or beside a pick's section, and never inside or adjacent to the comparison table. Those three zones are where the affiliate clicks happen, and an ad there competes directly with the button. On informational posts the usual in-content placements (after the second paragraph, between sections) are fine, because there's no button to protect.
Do display ads hurt affiliate conversion rates?
Yes, when they sit near the affiliate links. An ad above the verdict pushes the button below the fold on a phone; an ad beside the table pulls the eye; a sticky footer ad covers the button the reader was about to tap; and ad scripts slow the page, which costs clicks before the reader has seen anything. Sites that add a full ad layout to buyer guides commonly see affiliate click-through fall by a fifth or more, which at affiliate RPMs is a bigger loss than the ad RPM gained. Keep ads off the three zones and the effect mostly disappears.
AffSERP guides put the verdict button in the first screen, a button per pick section and the table in its own block, so the ad-free zones map to placement rules rather than per-guide edits.
Start with free words